This recipe is from Season 2 of 5 Ingredient Fix
Preheat the oven to 400 degrees F.
Put a large piece of aluminum foil on a baking sheet and put the beets on it. Drizzle olive oil over them and wrap them tightly in the foil, making a packet. Roast until a knife inserted into the largest beet meets no resistance, about 1 hour to 1 hour and 15 minutes.
Cool and remove the skins by rubbing the beets with a paper towel. (Gloves are a good idea to prevent staining your hands.)
Cut the peel away from the oranges with a sharp knife, exposing the flesh. Hold the peeled orange in your hand and carefully slice the segments away from the membrane, dropping them into a bowl. Do not discard membrane.
Thinly slice the beets and arrange on serving plates. Scatter the orange segments and hazelnuts over the sliced beets, drizzle the plates with olive oil and squeeze a little juice from the orange membrane over each plate.
Season with salt and pepper, to taste. Garnish with shaved thin slices of cheese and serve.
» Metric Converter
We are direct provider for BG/SBLC specifically for lease, at leasing price of (5.0 + 2)% of face value, Issuance by HSBC Bank London , Barclays Bank London , Deutsche Bank, BNP Paribas, & AAA Rated Banks in Europe, Middle East or USA. Our BG/SBLC Financing can help you get your project funded, loan financing by providing you with yearly renewable leased bank instruments. We work directly with issuing bank lease providers, this Instrument can be monetized on your behalf for 100% funding: For further details contact us with the below information. Contact : Michael Sadza Email: email@example.com Skype mr.sadza.lease Intermediaries/Consultants/Brokers are welcome to bring their clients and are 100% protected. In complete confidence, we will work together for the benefits of all parties involved With God All is Possible.
» 30m ago
Step 6: Conclusions Now you're finished! A professional looking canvas at a very low cost. Here's a few notes that might help as well. If you are stretching a lot of paintings at once, it might be easier to cut all the wood at once but just make sure to keep the pieces together. If your painting is especially large then a cross brace or two may be necessary to create a strong frame. It is a matter of preference but generally if the painting is larger than 3 feet across then a cross brace would be a good idea. For this simply use a 1” x 2” strip cut square and staple it (on both sides of the frame) in the center. The should not be used for the brace pieces. Good luck with framing!
» 4h ago
Step 5: Stretch the Canvas Now you are finally ready to stretch the canvas. To do this lay a piece of paper down on a clean surface, and then the painting face down. Line up the frame so that the molding is against the canvas. To stretch this pull one side of the canvas up and around and staple it in the center of that side. Next take the canvas pliers, stretch the canvas on the opposite side and staple in the center. Although this can be done alone, a second pair of hands might make this step a little easier. Flip the painting over and make sure that it lines up properly with the frame. If it does you can begin stapling the rest of these sides. On the one side of the sides with a staple in it, place two staples, approximately 2”-3” on either side of the center staple while stretching the canvas. Do the same on the opposite side of the painting. Continue to work your way outwards towards the corners, until there you are about 1” from the corner. Next repeat this process along the other two sides of the painting, stretching the canvas tight. When you have completed this you can fold the corners of the painting as you would a present and staple them to the strip in the back. It is a matter of preference if you want the folds on the top and bottom or sides of you painting but being consistent will make them look better.
» 4h ago